To set
up an HP printer HP DeskJet 3520 on a wireless (Wi-Fi) network, install
the print driver and software from the HP DeskJet 3520
Wireless Installation website.
When prompted during the installation, select Wireless as the connection type
or call our toll-free number +1-850-761-8950
HP DeskJet 3529 Wireless Setup for Windows
Step 1: Gather the required
items
Before setting up the
printer on your wireless network, gather the requirements, and then make sure
the printer and computer connections.
1. Gather the following items
- Network name: The network name is the SSID (Service Set Identifier)
- Network password :WEP key or WPA security passphrase
- A computer connected to your wireless network
- Internet access (recommended): HP DeskJet 3529 recommends broadband Internet access such as cable or DSL.
- Your wireless-capable printer: Place your printer near to the computer during the installation.
- USB cable: The installer prompts you when to connect the USB cable.
2. Set the printer, router, and computer are all Switch on and Make
sure that the computer is connected to the same wireless network to which you
are connecting the printer.
3. Unplug any USB or Ethernet cables from the printer.
Step 2: Download and install
the driver
To set up the printer on
a wireless network, install the printer driver, and then connect the USB cable from the printer to the computer to gather the necessary wireless information from the computer.
1.Go
to HP DeskJet
3520 Wireless Setup.
2.Click Download, and then Select Open, Save,
or Run.
3.Double-click the downloaded driver file in the browser downloads
bar or in the Downloads folder on the computer to start the
driver installation.
Fig 1: Example of the HP driver file in a browser downloads bar
Fig 2: Example
of the HP driver files in a computer Downloads folder
4. Follow the on-screen instructions to complete the connection setup
and driver installation.
HP DeskJet 3529 Wireless Setup for MAC
Before setting up the
printer on your wireless network, gather the requirements, and then make sure
the printer and computer connections.
Step 1: Gather the required
items
Before setting up the
printer on your wireless network, gather the requirements, and then make sure
the printer and computer connections.
1.Gather the following items:
a.Network name: The network name is the SSID (Service Set Identifier).
b.Network password :WEP key
or WPA security passphrase
c. A computer connected to your wireless network
d.Internet access (recommended): HP
DeskJet 3529 recommends
broadband Internet access such as cable or DSL.
e.Your wireless-capable printer: Place your printer near to the
computer during the installation.
f.USB cable: The installer prompts you when to connect the USB cable.
Step 2: Restore printer
wireless settings to factory defaults
To remove any existing
wireless settings, restore the printer to the factory default settings.
1.On the printer control panel, select the Wireless button.
The
Wireless status screen displays.
2.Select Settings.
3.Press the down arrow to scroll down and select Restore
Defaults, and then press OK.
4.Press OK to confirm that you want to restore the
network settings to factory defaults.
5.When the Wireless menu displays, make sure the blue light next to
the Wireless icon is blinking, and then press cancel to go to the
control panel.
Step 3: Download and install
the driver
Complete the wireless
network connection through the HP software installation.
- Go to HP DeskJet 3520 Wireless Setup
- Click Download, and then Select Open, Save, or Run.
- When the download is complete, click the file named xxyyzz.dmg in the browser downloads bar or in the download folder on the Mac to start the installation.
Figure 3:xxyyzz.dmg
Figure 4: Downloads folder
- The installer window displays.
- In
the installer window, double click HP DeskJet SW OSX.
Figure: HP Inkjet SW OSX
in the installer window
- Follow
the on-screen instructions to complete the installation.
- When prompted, close the installation software.
Continue to the next
step to configure the wireless connection.
Step 4: To set up the wireless
connection
Use the HP Utility software to configure the
wireless connection.
After you close the installation software, wait for the HP Utility
software to open.
- In the HP Utility Setup window, select the name of your printer, and then click Continue.
- Make sure your network is listed on the screen, click yes, keep these settings, and then click Continue.
IMPORTANT:
If a
different network than yours displays, choose your network, and then click Continue.
- On the HP Utility wants to access key "HP's Wi-Fi Network" in your keychain window, click Allow.
- When the Configuration Results screen displays, click Continue.
- Click Add Printer.
- The Add window displays.
- Click the name of your printer.
- Make sure you select the printer that has listed under Kind.
- Click the Use or Print Using menu, and then select the name of your printer in the drop-down menu.
- Click Add to add the printer to the list.
- In the installer Add Printer window, click Continue.
Follow the on-screen instructions to complete the printer setup,
and then click Done.
For further issues our
technician guide you to resolve any technical issues call our toll-free number +1-850-761-8950 or visit our website HP
Printer Setup and Installation.