First Time Printer Setup
• To achieve the 123.hp.com/setup remove the printer out of its packing. Check the package for all the list of items
• Raise the lid of the scanner and remove the packing tape around it
• Tape and packing material from the cleanout area and ink cartridge access area should also be removed
• Remove the sticker on the 123.hp.com/ojpro8720 printer's control panel
• Remove the packing tape from the paper tray door by extending it and push the paper tray forward until it clicks
• Turn on the printer by plugging it into a power source and set Preferences
• To fully configure the 123.hp.com/setup press the down arrow on the control panel to select the language
• Then press the down arrow to select the Set Country/Region
• Press Yes after each action
• Pull out the paper tray and the tray extender to load the paper
• The slider width guides can be adjusted to their outermost positions
• After loading and aligning the paper, push the paper tray forward till it clicks into place
• The ink cartridges have to be loaded through the access door which is raised and locked into place
• As the door is raised, the carriage automatically moves to an accessible position
• The carriage has to be idle and silent for the (123.hp.com/setup) setup to continue
• After taking the cartridge out of the package, remove the plastic tape from the top of it without touching the ink nozzles
• Lift the lid of the ink cartridge slot, press the cartridge in till it snaps into place
• Repeat the action for other ink cartridges and close the lid to secure the cartridges in their places
• Close the access door of the print cartridge and align the cartridge according to the instructions on the control panel
• After alignment of the ink cartridges the printer prints an alignment page