HP LaserJet 9000 Setup | HP LaserJet Printers Setup and Installation

HP LaserJet 9000 Basic setup

Firstly, take the HP LaserJet 9000 Setup printer out.
Then, check if you have got the instruction guide, power cable, and black and colorcartridges.
Remove the cover and the thermocol fittings from the printer.
Furthermore, open the scanner lid and take the Styrofoam sheet and then, close the scanning lid.
Likewise, slowly open the printer top cover and remove the safety cardboard plank.
Remove the protection tapes from the paper tray and check if the tray looks ok.

HP LaserJet 9000 Power and Control panel Setup

Unpack the power cord and connect the appropriate ends to the printer and the power socket.
Then, press the power button of the HP LaserJet 9000.
The printer initialization commences.
Now, the notification to select your language preference pops up. Select your preferred language per your choice and then confirm your choice.
Subsequently, also choose your country and then click confirm.
Next in the date selection, select the date.
Furthermore, choose the required options in the time settings.

Open the top cover of the HP LaserJet 9000 Setup carefully.
You would have got two cartridges along with your HP LaserJet 9000.
A black cartridge and a tricolor cartridge.
The tri-colors are Cyan, Magenta, and Yellow.
Unpack the HP LaserJet 9000 black cartridge and do away the protective tapes.
Not removing the protective tapes will result in mal-functioning of the cartridge.
Ensure not to touch the contact and nozzles of the black cartridge.
Place the black cartridge to the right side slot of the cartridge holder.
Subsequently, do the same steps for the HP LaserJet 9000 tri-color cartridge and place it in the left side slot.
Now, shut the top lid and click on OK in the control panel.

To know more on the set up of 123.hp.com/laserjet9000 contact us @+1-850-761-8950 or visit our site 123.hp.com/setup