HP printers are so far
the most practical printers in the industry. There is a wide range of options
to choose from; there is a product for everyone, that’s where it shows
dominance. As the latest innovation, the introduction of the eco-friendly
printers has pushed the technology to better heights. Also, the hp printer
setup is one of the easiest processes, only next to printing with an HP
printer. The Hp printer setup is compatible with both Windows and macOS. Go
through this article using 123.hp.com/setup and complete your HP printer
setup right away.
Complete
the following instructions
- Start by unboxing the printer from
the package.
- Remove all the protective covers,
Styrofoam, bubble-wraps, etc.
- Make sure to remove the tapes from
the movable parts of the printer.
- Once you remove all the casings,
look for the power cable inside the package.
- Connect the power cable to your
printer, running from the wall-socket for a steady supply of power.
- Once the power source is
connected, turn the printer ON.
- Refer to the quick start guide for
basic instructions.
- Now, complete setting the basic
preferences like the language, country, time, etc. Install the papers into
the paper tray accordingly.
- Install the ink cartridges on your
printer.
- Do not handle the cartridge by
holding it at the “strip” part. This will damage the cartridge’s printing
quality.
- Push the cartridges into the slot
until you hear a click sound.
- The click sound indicates the
proper locking of the cartridges at their slots.
Connecting
the printer wirelessly
For the HP printer to
connect with the windows or MAC device wirelessly, you have to connect the
devices to the same network. Once you connect both the devices to the same
network, proceed with the following steps.
For
windows,
- Launch the change device
installation settings from the computer.
- Make the necessary changes and
save them on the page.
- Connect the USB cable to the port
and link the device to the computer.
- The device will indicate the
detection of new hardware.
- Proceed to download the drivers to complete the installation process.
 |
For
Mac,
- Firstly, you have to download the
driver-product installation software on your device.
- Select the USB connection type for
the printer when it prompts.
- Proceed with the instructions on
the screen to complete the setup.
- Once you exit from the
installation software, the utility software for the HP printer opens.
- Now click on “continue” and select
the “Add printer” option on your screen.
- If you select the “use” option on
the software, a list of available printers will load up.
- If you don’t see your printer’s
name on the list, make sure the printer and the Mac computer are connected
to the same network.
- You will see your printer’s name
on the list of available printers, select yours.
- Now click on the “Add” tab to add
your printer on the list.
- Click on “continue” and proceed
with the instructions on the screen to complete the setup.
If you need further
assistance regarding the HP printer setup, please contact our support team number +1-850-761-8950 who
are always ready to help you with your situation or visit our site 123.hp.com