How to fix the Print Head Issues in Hp Office Jet Pro 8600?

This document guides you to resolve the print head issues.
Follow these steps to replace the printhead assembly in the HP printer:
Step 1: Remove cartridges and print head
·        Load unused, plain white paper in the input tray and then turn on the printer.
·        On the left side printer you have to slip your fingers into the slot and then pull forward to open the cartridge access door.
·        You have to move the carriage to left side of the printer to lift the latch handle before to see the carriage is idle and silent.

                        Figure 1.Remove cartridges and print head
  •              Grasp the sides of the print head and then remove the print head with all of the cartridges inserted.
  •            If a postage-paid mailing label and a return envelope are included with the new printhead, HP would like to have the old part back for analysis.
  •           If no post-paid mailing came with your new printer print head, you have to recycle the old part.


Step 2: Insert the new print head
·        Follow these steps to insert the new printhead into the printer
·        Without touching the electrical nozzles on the print head to insert the new printhead.
·        Grasp the print head on both sides with the electrical nozzles towards the rear of the printer, and then insert the printhead into the carriage.
·        Lower the latch handle on the carriage


                                  Figure 2.Insert the new print head
Step 3: Insert the new cartridges
  •            To avoid startup failures.
  •             Remove the new cartridge from the package.
  •             Move the new cartridge into the slot, to push forward into fit on the place.
  •             Make sure that the colored dot on the cartridge label matches that slot.
  •              Repeat these steps to insert other cartridges. And then close the cartridge access door.



                                  Figure 3.insert new print head

·        Now the HP Printer takes six minutes for initializes. In that time the printer to make noises. After the process completes, the printer prints an alignment page.
If you have any more error happen in your printers or any doubt about printers. Our Technician will help you to resolve any technical error, call our technician toll-free number +1-850-761-8950 or visit our site Hp office jet pro 8600 Print Head.