HP OfficeJet Pro Printing Problems
HP OfficeJet Pro Printers are compact but efficient printers.
However, occasionally you might run into some printing problems when you are
using your HP OfficeJet Pro Printers. You can resolve them easily by following the steps
mentioned below
HP OfficeJet Pro Printer issues and troubleshooting:
HP OfficeJet Pro
Printer reset
You can clear many printing problems with just by simply
resetting your HP OfficeJet Pro Printer using 123.hp.com
- First, turn on your HP OfficeJet Pro Printer and wait till your printer is idle.
- After that, keeping your HP OfficeJet Pro Printer in on condition remove the power cord from the back of your printer.
- Following this, unplug the power cord from the electrical socket.
- Now after waiting for a minute, reattach the power cord back to your printer and plug it in again your wall socket.
- Your HP OfficeJet Pro Printer should turn on automatically, if not, then try the other troubleshooting steps.
‘Printer
Failure’ message sometimes an error code would be included
- After resetting your Printer, if your issue isn’t resolved
clear any jammed paper.
- Check if the paper is torn or damaged and replace it.
- If your HP OfficeJet Pro Printer has a duplexer, remove it
and clean it inside.
- Make sure your ink cartridges are inserted correctly.
Ink not printing, other print
quality issues
- If you encounter this problem, first uninstall any HP Printer drivers you have installed.
- Subsequently,
navigate to the 123.hp.com/ojpro and
download the printer software again.
- If
the problem persists, on your HP OfficeJet Pro
Printer control panel touch ‘setup’.
- After that, open ‘Printer maintenance’ and select ‘Clean
Printhead’.
If the problems persist, or if you have any other queries
related to HP OfficeJet Pro printing troubleshooting , you can call our customer service number +1-850-761-8950 or visit our website www.123.hp.com/setup.