Setting up the printer
in the wireless way
For more information related to New Printer Setup just visit our site 123.hp.com/setup or call our support number +1-850-761-8950
Let us start with a
much-preferred setup technique. The commands for performing the wireless setup
are given below:
- In the beginning, you will have
to download and link the printer to the wireless network.
- You must know the network name
and password.
- Then use the USB cable for
setting up your printer on a wireless network.
- Surf to the driver and software
downloads, then feed the printer name and click enter.
- Download the full-feature
software and follow the on-screen instructions for installing. and setting up
the HP Laserjet Printer on a wireless network.
- For finishing the installation, restart the computer.
This method is done for
printers that work on the wireless network.
HP Wired setup
First of all, you need to
install the printer driver and software for setting up the printer on a
wired network.
- Ensure that you have a network
router which has Ethernet ports.
- Always check whether the
computer is connected to the router.
- After this, you must acquire an
Ethernet cable.
- Never use a standard telephone
cable for this process.
- Then you will have to turn on
the printer.
- Disconnect the plug
from the rear of the printer or the Ethernet port.
- Finally connect the Ethernet
cable to the printer.
- Surf to the HP webpage and you will be asked to download the printer software.
Troubleshooting during the setup
Here are some of the steps to
prevent the troubleshooting in the printer:
- Connect the printer with the
cable and you can find that the Wi-Fi signal is the issue.
- Try locating the printer to a
new place.
- Then check the printer queue.
- The HP printer must be rebooted.
- Ensure that the firmware is
updated to the latest version.
- Perform a reset on the printer.