HP DeskJet
3630 first time setup
When you are setting up the printer for the first time, then
these are the steps you will need to follow:
- Firstly you will have to unpack the HP DeskJet 3630 from the box.
- When you remove the printer from the box, materials like tapes and stickers must be peeled off.
- The Ink cartridges must be installed.
- Then you will have to load the paper into the input tray.
- After this, install the printer software.
 |
HP DeskJet 3630 Driver setup- 123.hp.com/dj3630
install
You must make sure that the computer is ready for downloading
the driver software
- Firstly , search and then you will have to open the change device installation settings.
- In the window that appears, choose the yes option and select save changes.
- Then connect your PC via wireless, wired or USB setup.
The Add a Printer wizard is used for installing the built-in
print driver.
For installing the driver in a computer that runs on Windows 10
operating system, follow the steps that are below:
- In the windows operating system, search for the control panel and then you can open it.
- Then choose the devices and printers option, under that select add a printer.
- In the following window that appears, choose your printer select next and follow the instructions that are visualized on screen.
- Select next.
- You can also choose the port where the printer must be operate.
- The printer drivers can be updated by clicking Windows update.
- Using the hostname or TCP/IP address, you can now add the printer.
- Wait for some time so that the PC may get connected to the printer.
- Choose next to 123.hp.com/dj3630 install the print driver.
For more information related to HP Printer Setup and Install just call our support number +1-850-761-8950 or visit our site www.123.hp.com/setup.