To establish the HP Tango X Wireless setup, you can make use
of the WPS method that we explain here.
Prerequisites
- Make sure you connect the printer to
the same wireless network as your computer or the system that you are using.
- Turn on both of them.
- Load ink, papers, and other basic
requirements into the printer.
Make sure you follow the steps below to complete the HP Tango X Wireless setup.- Use these steps to link your printer
to your wireless network with the WPS button on the router if your router
supported WPS.
- Switch on screen and turn on the
printer.
- Locate your router's WPS button, but
do not yet press it.
- Save the next move to connect your
printer to HP Smart App if your router does not support WPS.
- Click the Wireless button and power
key for five seconds simultaneously on the back of the printer.
- Push the WPS button on the router
for 3 to 5 seconds or until the communication phase of the WPS starts.
- The blue wireless light on the control panel is solid when your printer connects to the wireless network.
For accomplishing the HP Tango X Wireless setup using the
WiFi direct or any other methods, please prefer calling the customer care team
@ +1-850-761-8950 or visit our site 123.hp.com/setup